商品情報にスキップ
1 11

ユーティリティスクレーパー 刃先調整固定式

SKU #10591

工業/産業用のスクレーパーとして、錆びることなく、触っても安心なfinger-friendly®(指にやさしい)安全刃を使用したSlice® 10591 ユーティリティスクレーパー 刃先調整固定式が登場しました。Slice社のスクレーパーは、頑丈な持ち手にセラミック替刃(10526 ラウンド刃先ユーティリティ/10528 鋭角刃先ユーティリティ)を固定し、安全かつ快適にスクレイピング(削り取り)作業を行うことができるツールです。10591 ユーティリティスクレーパー 刃先調整固定式は、耐久性の高いグラスファイバー強化ナイロン製であり、グリップは滑らかで握り心地よく、手にかかる負荷を減らしながら、数時間にわたってスクレイピングが続けられるように設計されています。刃先は調整固定式で、使用するときはスライダーボタンを押し上げて刃を出します。使用しないときは、刃の破損や怪我を防ぐため、スライダーボタンを引いて刃を持ち手の中に引き戻します。

  • 付属している刃の種類:セラミック替刃(ラウンド刃先ユーティリティ)
  • 耐久性の高いナイロン製持ち手(滑らかで握り心地よいグリップ)
  • 左右両利きに対応するデザイン
  • 適合する替刃:10526、10528
  • finger-friendly®(指にやさしい)刃は、金属刃に比べ耐摩耗性が11倍
  • 化学的不活性の刃、錆びない
  • 非発火性、非電導性、非磁性の刃
  • オイルや潤滑油が不要な刃
  • ケガの軽減、コストの削減
  • 刃の交換に工具不要
  • SKU #10591

Great for:

  • Scraping stickers, rust, and debris
  • Removing paint from wood
  • Clearing away wallpaper, residue, and adhesives
  • DIY household projects

Product Specifications

Cutting Depth:

Material: GFN, TPEE, POM, zirconium oxide

Dimensions: L 5.37 in x W2.88 in x H0.9 in

Weight: 0.18 lb

Sell Sheet


Videos

  • Manual Utility Scraper
  • Blade Replacement on Slice Utility Scrapers



FAQ

How Is This Utility Scraper Safer Than Standard Scrapers?

A standard flat-bladed utility scraper uses a standard (read: dangerously oversharpened) steel utility blade, or even a razor blade. But like standard steel cutting tools, the metal blade wears down quickly. Users are often left with a blade that’s too sharp or too dull, both dangerous in their own way.

Advanced ceramics last much longer than steel, but other ceramic scraper manufacturers still use an unnecessarily sharp blade. So while their blades may not dull quickly, they still start out dangerously sharp.

Slice® blades have a unique finger-friendly® edge that’s sharp enough to be effective, but still safe to the touch. This allows companies who use Slice to reduce injuries and lower costs.

Will a Ceramic Scraper Break?

We can’t speak for any other ceramic scraper on the market, but Slice scrapers are sturdy and take advantage of our thicker blade to absorb pressure without breaking. Remember, we use 100 percent zirconium oxide—which is much harder than steel—not typical kitchen ceramics, which are prone to shattering. And while our blades will eventually break if they’re subjected to a side load, the design of a scraper doesn’t allow this because the pressure is absorbed across the length of the blade.

How Do You Change the Slice Manual Scraper’s Blade?

On the top of our ceramic scraper, you’ll see an orange slider button, which is used to set the blade position. As part of that mechanism, there is a small tab with the image of a lock engraved in it.

First, set the handle to the exposed blade position. Then, press downward on the “lock” tab so that it won’t catch on the dark grey handle. At the same time, push the slider as far forward as it can go. Your blade should now be fully exposed and easy to lift off the orange blade holder. Simply remove the current blade and replace it with a new 10526 or 10528 blade, lining up the blade notch so it sits in the holder. Then press on the slider mechanism again and pull the blade all the way back into the housing.