• The Slice 10597 Auto-Retractable Seam Ripper
NaN -Infinity

Découseur auto-rétractable

SKU #10597

Learn More

Le Découseur auto-rétractable Slice® 10597 est idéal pour les industries où les lames fixes sont interdites, ou pour quiconque cherchant une alternative plus sûre à un découseur manuel. Alors que des découseurs à lames rétractables sont disponibles sur le marché, Slice introduit la première version de découseur à lame en céramique technique Slice®. Et parce que les lames sont des lames de sécurité en céramique Slice®, elles sont dotées d'un tranchant finger-friendly®. Le manche du découseur Slice est long et mince. Il est conçu en plastique durable renforcé de fibre de verre. Le manche est compatible avec les lames de découseur au bout arrondi et au bout pointu.

  • Type de lame en standard : Lames pour découseur 10536 (bout arrondi)
  • Manche résistant en nylon
  • Ambidextre
  • Lames compatibles : 10536, 10537
  • Le tranchant finger-friendly® dure 11 fois plus longtemps que celui d’une lame en métal
  • Lame chimiquement inerte et qui ne rouille pas
  • Lame qui ne produit pas d’étincelles, non conductrice, non magnétique
  • Lame sans revêtement huileux ni lubrifiant
  • Moins de blessures, coûts réduits
  • Changement de lame sans outil
  • Réf. 10597

Great for:

  • Cutting string and thread
  • Removing stitches and opening buttonholes
  • Deburring soft plastics
  • Hooking and slicing film

Cutting Depth: 0,59 po

Material: GFN, POM, stainless steel, carbon steel, zirconium oxide

Dimensions: L 5,75 po x W0,8 po x H0,33 po

Weight: 0.07 lb

Videos

  • Blade Replacement for Slice Seam Rippers

Compatible Products

Related Products

FAQ

Traditional seam rippers aren’t retractable, but demand for such a tool has increased as industries and consumers alike look for safer alternatives to traditional tools. As such, retractable seam rippers are used by people who are primarily concerned with safety.
Slice pushes the boundaries of the conventional retractable seam ripper definition by introducing a new kind of blade never before seen on the market: an advanced ceramic blade. And while we’re at it, of course we don’t use unnecessarily sharp advanced ceramics, which pose the same risk for lacerations as overly sharp metal blades. The edges of all our blades are finger friendly®, which means they cut effectively and are safer to touch. Choose from the installed 10536 rounded-tip blade or the 10537 pointed-tip version.
As with all our tools, the blade you use depends on your application and your priorities. In general, a rounded-tip blade is safer, as it’s less likely to cause accidental punctures. If, however, the material you need to cut requires a pointed tip to initiate the cut, you’ll have to forego the protection of a rounded tip in favor of better usability.
As with all Slice tools, our seam rippers have an easy, no-tool blade change. To do this,
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.