제품 정보로 건너뛰기
1 8

자동 후진식 미니 커터

SKU #10514

Slice® 10514 미니 커터의 날은 안전 박스 커터, 포켓 나이프나 다용도 주방 도구만큼이나 잘 듣습니다. 이 자동 수축식 날은 칼날이 사용되고 있지 않을 때 위험을 방지해주며, 내장된 자석은 보관을 용이하게 해줍니다. 이 작은 커터는 교체 가능한 10404 둥근 칼끝의 안전날과 함께 배송됩니다. Slice 10514는 양손 모두를 위한 제품이며, 왼손잡이 사용자들은 그저 사용하기 전 칼날을 반대편 슬롯으로 교체해주기만 하면 됩니다. 이 작은 커터의 날은 스파크를 유발하지 않고, 화학적인 반응을 하지 않으며, 절대 녹슬지 않습니다. 모든 Slice 칼날이 그러하듯, 이 날은 금속날보다 11배까지 오래 갑니다.

  • 설치된 날 유형: 둥근 칼끝
  • 자동 스프링식 후진으로 추가 안전 확보
  • 양손 모두를 위한 디자인: 왼손잡이를 위한 칼날 슬롯 교체
  • Finger-friendly®날로 효율적인 커팅
  • 부상 및 비용 절감
  • 비 스파킹, 비전도성, 비자성인 칼날
  • 절대 녹슬지 않으며 화학적으로 비활성
  • 오일 및 윤활유 미사용 칼날
  • 100% 산화 지르코늄 칼날
  • 금속보다 11.2배까지 오래 가는 칼날
  • 호환 칼날: 10404, 10408
  • 별다른 공구가 필요 없는 날 교체
  • SKU #10514

Great for:

  • Opening cardboard boxes and packages
  • Cutting film
  • Cutting painter’s tape

Product Specifications

Cutting Depth: 0.35in

Material: ABS, POM, stainless steel, NdFeB magnet, zirconium oxide

Dimensions: L 2.44in x W1.44in x H0.46in

Weight: 0.04 lb

Sell Sheet

  • These little things are amazing. They fit right in an employee badge holder and are always there when you need them. Everyone at work wants one and I learned the hard way not to lay it down and forget because if you go back 5 minutes later, it's gone for sure!!!!

    Linda T.

  • Great little cutter to keep handy. It slices through clamshell packing as easily as opening a cardboard box. I've given them as gifts and everyone loves them.

    David F.

  • It's honestly one of those little things that improve your daily life that you don't notice. It MAGNETS, so I keep it on the side of a radiator right next to the door. You always know where to find it, easy to grab, easy to use. Apparently I've had it for 5yrs and it still cuts great.

    Leia


Videos

  • Mini Cutter
  • Mini Cutter Blade Replacement
  • How To Cut Painter’s Tape Using Slice Tools



FAQ

What Is a Mini Cutter Used For? Is This a Mini Box Cutter?

The Slice Mini Cutter is a versatile miniature ceramic blade pocket knife that can function as a small box cutter or mini utility knife. It can handle the same materials as a safety box cutter and a few more, such as: wire mesh, yarn, rubber hose and sealant. The Slice Mini Cutter is a popular household tool, particularly in houses with both right- and left-handed people. Its ambidextrous design means everyone can use it, and its small cutter blade opens a variety of packaging materials, including hard clamshell plastic. It’s equally useful in industrial settings as a multi-purpose tool that lasts, on average, 11.2 times longer than an equivalent steel blade. Once one end of the blade is too dull to use, open the housing and flip the blade for a fresh edge.

What is the best pocket knife for me?

The best pocket knife for you will depend on your needs. First, make sure that any pocket knife is actually safe to carry in your pocket. This means the blade must not be exposed when the tool is not in use.

Next, look at the depth of the cut you require and make sure that your knife can handle it. As a general safety principle, you should never expose more blade than you need to do the job. This reduces the chance of injuries and damaged materials (especially when opening packaging). The third consideration is handle shape and size, and this depends largely on personal preference. The Slice 10514 Mini Cutter works as a handy ceramic pocket knife that can handle most materials, including clamshell packaging and double-walled corrugated.

The Slice 10514 Mini Cutter’s Blade Change Mechanism

This is one of many areas where Slice improves on the safety of traditional knives, including mini box cutters and standard ceramic-blade knives.

When you look up how to put a blade in a box cutter, you’ll see a nightmarish list of options including complex multi-step processes and dangerous snap-off blades. The Slice Mini Cutter’s no-tool blade change is straightforward. Simply slide the lock mechanism into the unlocked postion (marked on the back of the tool) and lift off the back of the housing. Pull the small cutter blade out and either flip it over for a fresh edge or put in a new blade, ensuring that the notches in the blade and housing line up. For left-handed users, switch the blade into the second blade slot. Replace the backing and slide the mechanism back into a locked position. Now you’re ready to use this amazing small cutter again!