제품 정보로 건너뛰기
1 11

수동식 유틸리티 스크래퍼

SKU #10591

Slice® 10591 수동식 유틸리티 스크래퍼로 공업용 스크래퍼의 세계에서 녹 걱정 없는 저희 Finger-friendly® 날을 소개합니다. Slice 스크래퍼는 편안하고 안전한 스크래핑 작업을 위해 튼튼한 핸들에 장착된 10526 (둥근 칼끝) 및 10528 (뾰족한 칼끝) 유틸리티 칼날을 사용합니다. 부드러운 터치감의 편안한 그립과 튼튼한 유리 충전된 나일론 재질의 이 유틸리티 스크래퍼는 몇 시간의 스크래핑 작업이고 적은 손목의 부하로 수행해내도록 고안되었습니다. 핸들은 두 가지의 날 위치로 작업 중이 아닐 때 사용자를 보호합니다.

  • 설치된 날 유형: 둥근 칼끝
  • 만져도 부드러운 편안한 그립감의 튼튼한 나일론 핸들
  • 양손 모두를 위한 디자인 
  • 호환되는 칼날: 10526, 10528
  • 금속보다 11배 오래 사용 가능한 Finger-friendly® 칼날
  • 화학적 반응을 일으키지 않아 절대 녹슬지 않는 날
  • 스파킹 비유발, 비전도, 비자성 날
  • 오일 및 윤활유 미사용 날
  • 부상 및 비용 절감
  • 공구가 필요 없는 날 교체
  • SKU #10591

Great for:

  • Scraping stickers, rust, and debris
  • Removing paint from wood
  • Clearing away wallpaper, residue, and adhesives
  • DIY household projects

Product Specifications

Cutting Depth:

Material: GFN, TPEE, POM, zirconium oxide

Dimensions: L 5.37in x W2.88in x H0.9in

Weight: 0.18 lb

Sell Sheet


Videos

  • Manual Utility Scraper
  • Blade Replacement on Slice Utility Scrapers



FAQ

How Is This Utility Scraper Safer Than Standard Scrapers?

A standard flat-bladed utility scraper uses a standard (read: dangerously oversharpened) steel utility blade, or even a razor blade. But like standard steel cutting tools, the metal blade wears down quickly. Users are often left with a blade that’s too sharp or too dull, both dangerous in their own way.

Advanced ceramics last much longer than steel, but other ceramic scraper manufacturers still use an unnecessarily sharp blade. So while their blades may not dull quickly, they still start out dangerously sharp.

Slice® blades have a unique finger-friendly® edge that’s sharp enough to be effective, but still safe to the touch. This allows companies who use Slice to reduce injuries and lower costs.

Will a Ceramic Scraper Break?

We can’t speak for any other ceramic scraper on the market, but Slice scrapers are sturdy and take advantage of our thicker blade to absorb pressure without breaking. Remember, we use 100 percent zirconium oxide—which is much harder than steel—not typical kitchen ceramics, which are prone to shattering. And while our blades will eventually break if they’re subjected to a side load, the design of a scraper doesn’t allow this because the pressure is absorbed across the length of the blade.

How Do You Change the Slice Manual Scraper’s Blade?

On the top of our ceramic scraper, you’ll see an orange slider button, which is used to set the blade position. As part of that mechanism, there is a small tab with the image of a lock engraved in it.

First, set the handle to the exposed blade position. Then, press downward on the “lock” tab so that it won’t catch on the dark grey handle. At the same time, push the slider as far forward as it can go. Your blade should now be fully exposed and easy to lift off the orange blade holder. Simply remove the current blade and replace it with a new 10526 or 10528 blade, lining up the blade notch so it sits in the holder. Then press on the slider mechanism again and pull the blade all the way back into the housing.