Gå til produktoplysninger
1 af 11

Manuel Skraber

SKU #10591

Slice® 10591 Manuel Skraber introducerer vores finger-friendly®, rustfri sikkerhedsknivblad til verdenen af industriskrabere. Slice-skrabere bruger vores 10526-knivblad (afrundet spids) samt 10528-knivbladet (skarp spids) i et fast håndtag, der fastlåser knivbladet, så det leder til komfortabelt og sikker skrabning. Udstyret med soft-touch komfortgreb og holdbart glasfyldt nylonkonstruktion, gør vores skraber i stand til, at holde til timevis af skrabning uden at forårsage overbelastninger. Håndtaget har to præinstallerede bladpositioner, der beskytter knivbladet og brugeren, når værktøjet ikke er i brug.

  • Installeret bladtype: afrundet spids
  • Holdbart nylonhåndtag med soft-touch komfortgreb
  • Ligehåndet design
  • Kompatible knivblad: 10526, 10528
  • Finger-friendly® kant holder 11x længere end metal
  • Kemisk inaktivt knivblad, der aldrig ruster
  • Gnistfri, ikke-ledende, umagnetisk knivblad
  • Olie- og smørelsesfrit knivblad
  • Reducerer skader, sænker omkostninger
  • Værktøjsfrit bladskift
  • SKU #10591

Great for:

  • Scraping stickers, rust, and debris
  • Removing paint from wood
  • Clearing away wallpaper, residue, and adhesives
  • DIY household projects

Product Specifications

Cutting Depth:

Material: GFN, TPEE, POM, zirconium oxide

Dimensions: L 5,37 tommer x W2,88 tommer x H0,9 tommer

Weight: 0.18 lb

Sell Sheet


Videos

  • Manual Utility Scraper
  • Blade Replacement on Slice Utility Scrapers



FAQ

How Is This Utility Scraper Safer Than Standard Scrapers?

A standard flat-bladed utility scraper uses a standard (read: dangerously oversharpened) steel utility blade, or even a razor blade. But like standard steel cutting tools, the metal blade wears down quickly. Users are often left with a blade that’s too sharp or too dull, both dangerous in their own way.

Advanced ceramics last much longer than steel, but other ceramic scraper manufacturers still use an unnecessarily sharp blade. So while their blades may not dull quickly, they still start out dangerously sharp.

Slice® blades have a unique finger-friendly® edge that’s sharp enough to be effective, but still safe to the touch. This allows companies who use Slice to reduce injuries and lower costs.

Will a Ceramic Scraper Break?

We can’t speak for any other ceramic scraper on the market, but Slice scrapers are sturdy and take advantage of our thicker blade to absorb pressure without breaking. Remember, we use 100 percent zirconium oxide—which is much harder than steel—not typical kitchen ceramics, which are prone to shattering. And while our blades will eventually break if they’re subjected to a side load, the design of a scraper doesn’t allow this because the pressure is absorbed across the length of the blade.

How Do You Change the Slice Manual Scraper’s Blade?

On the top of our ceramic scraper, you’ll see an orange slider button, which is used to set the blade position. As part of that mechanism, there is a small tab with the image of a lock engraved in it.

First, set the handle to the exposed blade position. Then, press downward on the “lock” tab so that it won’t catch on the dark grey handle. At the same time, push the slider as far forward as it can go. Your blade should now be fully exposed and easy to lift off the orange blade holder. Simply remove the current blade and replace it with a new 10526 or 10528 blade, lining up the blade notch so it sits in the holder. Then press on the slider mechanism again and pull the blade all the way back into the housing.